A&K  IPM Barcode

 

POS-X Scanner Setup

 

1. Install CS1504 Sync Software

 

2. Reassign the USB to COM port

           

            Click on Start


            Right Click on My Computer

 

 

 

 

 


            Click Properties

            Hardware

            Device Manager


 

 

 

 

 

 


            Other Devices (Ports (COMM & LPT)

            Right click on USB Serial Controller


 

 

 

 

            Select Update Driver

 


 

 

 

 

 

           


No, not this time


 

 

 

Install from a list or specific location (Advanced)


 


Browse – C:\Program Files \CS1504 Synch \USB Driver \WinXP

 


 

 

Click Next through Setup and Finish

 

Once installed, the synchronizing unit can be found under

Port (COM & LPT) – Prolific USB to Serial Comm Port.


 

 

3) To down load data from the CS1504

 

 

Icon should be copy to DESKTOP

 


 

Follow screen will show

Change the Comm port to match how it was installed.

Click READ – it will start to down load and erase all data on the unit.

 

NOTE -  [ ] Use Date Time Stamp should always be checked.

 


 


The following data is captured into the PC.

This data, then is imported into WinIPM Barcode.